Dynamic 3Ti-Base – Non Rotating – GH 3 – Incl. Dynamic Screw
Dynamic Abutment Solutions
Dynamic 3Ti-Base
Non Rotating
GH 3
Incl. Dynamic Screw
Visar 199–216 av 1304 resultatSortera efter popularitet
-
-
Dynamic 3Ti-Base – Non Rotating – GH 3 – Incl. Dynamic Screw
Dynamic 3Ti-Base
Non Rotating
GH 3
Incl. Dynamic Screw
-
Straight TiBase R Comp.0209
Levereras utan skruv.
Kombinera med skruv: 40.320.003.06-2 Screw DAS Multi-Unit Hex.1.20 M2 L4mm 25N·cm
-
-
-
Scanbody OP NR 030
A single piece made of titanium placed at 10mm height from the implant. It features two thread holes to attach Peek Pins (if it is necessary). The DAS code is printed on the surface
Hex 1,2 screwdriver is needed
-
DAS Multi-Unit 20º, G4.5/5.9, Comp.0207 and 208 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G3.5/4.9, Comp.0207 and 208 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G2.5/3.9, Comp.0207 and 208 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G3.5/4.9, Comp.0186 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G2.5/3.9, Comp.0186 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G3.5/4.9, Comp.0169 25Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G2.5/3.9, Comp.0169 25Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G1.5/2.9, Comp.0169 25Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G3.5/4.9, Comp.0125 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G2.5/3.9, Comp.0125 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G1.5/2.9, Comp.0125 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G3.5/4.9, Comp.0120 and 121 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM