DAS Multi-Unit 20º, G4.5/5.9, Comp.0006 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
Visar 235–252 av 1296 resultat
-
-
DAS Multi-Unit 20º, G3.5/4.9, Comp.0006 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G2.5/3.9, Comp.0006 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G4.5/5.9, Comp.0004 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G3.5/4.9, Comp.0004 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G2.5/3.9, Comp.0004 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
Scanbody OP – NR – Hex 1.20
A single piece made of titanium placed at 10mm height from the implant. It features two thread holes to attach Peek Pins (if it is necessary). The DAS code is printed on the surface
-
Pin B 13mm (pack 5)
PEEK PINS ARE USED TO BE FIXED TO THE REFERENCE SCANBODY TO AVOID LOSING THE REFERENCE BETWEEN IMPLANTS DURING SCANNING PROCESS IN EDENTULOUS CASES
-
Pin B 9mm (pack 5)
PEEK PINS ARE USED TO BE FIXED TO THE REFERENCE SCANBODY TO AVOID LOSING THE REFERENCE BETWEEN IMPLANTS DURING SCANNING PROCESS IN EDENTULOUS CASES
-
Pin B 6mm (pack 5)
PEEK PINS ARE USED TO BE FIXED TO THE REFERENCE SCANBODY TO AVOID LOSING THE REFERENCE BETWEEN IMPLANTS DURING SCANNING PROCESS IN EDENTULOUS CASES
-
-
-
-
-
DAS Multi-Unit 20º, G1.5/2.9, Comp.0022 25Ncm
- 20º ANGULATION
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
-
DAS Multi-Unit 20º, G1.5/2.9, Comp.0021 20Ncm
- 20º ANGULATION
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
-
-
