DAS Multi-Unit 20º, G1.5/2.9, Comp.0015 25Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
Visar 289–306 av 1334 resultatSortera efter popularitet
-
-
DAS Multi-Unit 20º, G4.5/5.9, Comp.0014 15Ncm
- 20º ANGULATIONDIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
- 20º ANGULATIONDIFFERENT GINGIVAL HEIGHTS AVAILABLE
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
-
DAS Multi-Unit 20º, G3.5/4.9, Comp.0014 15Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G3.5/4.9, Comp.0007 25Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G2.5/3.9, Comp.0007 25Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G1.5/2.9, Comp.0007 25Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G4.5/5.9, Comp.0006 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G3.5/4.9, Comp.0006 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G2.5/3.9, Comp.0006 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G4.5/5.9, Comp.0004 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G3.5/4.9, Comp.0004 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
DAS Multi-Unit 20º, G2.5/3.9, Comp.0004 20Ncm
- 20º ANGULATION
- DYNAMIC SCREWDRIVER IS USED FOR ITS PLACEMENT
- 4MM PLATFORM DIAMETER SAME AS THE STRAIGHT MULTI-UNIT
- DIFFERENT GINGIVAL HEIGHTS AVAILABLE
- 1,5MM
- 2,5MM
- 3,5MM
- 4,5MM
-
Scanbody OP – NR – Hex 1.20
A single piece made of titanium placed at 10mm height from the implant. It features two thread holes to attach Peek Pins (if it is necessary). The DAS code is printed on the surface
-
Pin B 13mm (pack 5)
PEEK PINS ARE USED TO BE FIXED TO THE REFERENCE SCANBODY TO AVOID LOSING THE REFERENCE BETWEEN IMPLANTS DURING SCANNING PROCESS IN EDENTULOUS CASES
-
Pin B 9mm (pack 5)
PEEK PINS ARE USED TO BE FIXED TO THE REFERENCE SCANBODY TO AVOID LOSING THE REFERENCE BETWEEN IMPLANTS DURING SCANNING PROCESS IN EDENTULOUS CASES
-
Pin B 6mm (pack 5)
PEEK PINS ARE USED TO BE FIXED TO THE REFERENCE SCANBODY TO AVOID LOSING THE REFERENCE BETWEEN IMPLANTS DURING SCANNING PROCESS IN EDENTULOUS CASES
-
-